A CHARMING CELEBRATION

Sometimes it is the tiniest of memories that are the most magical. Once upon a time when I was a little girl, my mother started a tradition by baking a silver charm in my birthday cake each year. Once found, the charm was added to a sliver bracelet for collecting. A very fond memory as well as a beautiful tradition. And a very exciting way to eat cake!

Follow this journey to make your own celebration cake (with a little twist) to celebrate any moment in life, big or small. Maybe this will become a special tradition for you too.

Decorating the cake you will need these-

Decorative Wire, 12 gauge (easily pliable)

Floral Wire, 26 gauge

Glass Pearls

Needle Nose Pliers

White Card Stock Paper

Heart Hole Punch, 1 ½”

Tiny Star and Tiny Heart Hole Punch, about ½”

Hot Glue Gun, Glue Sticks

Bamboo Skewers

Ribbon

To make the cake charger, I loosely wrapped the decorative wire around an inverted 6” cake baking pan. I wanted it to be larger in diameter than the cake. I aimed for the finished charger to clear the pan by at least an inch.

Next, overlap the wire and cut, giving enough length to overlap and twist together.

Punch about a dozen paper hearts from the 1 ½” heart punch. Lightly fold them in half.

Cut a dozen, three inch lengths of the floral wire. String one glass pearl on each wire.

Then cross the wires. Twist the entire length of wire.

Carefully add the twisted wire by wrapping it around the decorative wire a couple of times. Leave a little bit of the wire extending up.

Add a small drop of hot glue in the fold of the heart near the top.

 Quickly place the paper heart under the decorative wire to catch the twisted wire in the hot glue.

Pinch the heart slightly together.

Repeat all around the charger. Slightly bend the hearts to look like leaves.

To hide the twist, add a satin ribbon and tie it in a big bow.

Check to see if your charger is larger than the cake, place over the pan.

To make the cake toppers, cut three banners, two pennants from white card stock. I made the banners 3 ½” long by ½” wide and the pennants 2 ¼’ long by 5/8” wide. I shaped the ends by cutting a “V”. With the tiny punch, cut 6 stars and 4 hearts.

Fold the banners not quite in half. Fold the pennants in half. Erase any pencil lines.

Put a drop of hot glue in the fold of the banner.

Wrap the banner around the skewer. Repeat for all banners and pennants.

Place a small drop of hot glue on the star.

Place the skewer on top of the glue.

Place another drop of hot glue on the top of the skewer. Place a star on top. Repeat for all stars.

Repeat for the small hearts.

Gently roll the banner to look like it is blowing.

With your pliers, cut all skewers so the topper will be 5 ½” long.

I baked a white cake with buttercream frosting. Any cake and frosting can be used.

I chose to use 6” round baking pans. Once baked and cooled, I pushed the charm into the bottom layer of the cake. I tied a blue ribbon on the charm just to make sure the charm was found before it left the fork!

I placed a piece of tape on the platter next to the spot where the charm went so as to keep tabs on the location. That way you can slice the cake and be sure the charm goes to the person of choice. PLEASE USE CAUTION HERE! Alert all about the treasure inside before serving. No need to spoil a celebration with an emergency run to the hospital!

Time to frost and decorate the cake.

If you look closely, you can just make out the hidden charm in the middle of the layer on the left hand side.

What a fun way to celebrate any occasion in life. All you need is a little magic to create a tiny little memory that will last a lifetime. A beautiful tradition.

Read More

HANGING A WALL GALLERY FOR THE VISUALLY IMPAIRED

At the top of my stairway, there was a big blank wall just screaming for attention. In my mind, I was thinking of placing a collection of my favorite family photos, a wall gallery.

Searching through countless photos books, photos boxes and photos randomly tucked here and there, I found what I was looking for. Endless photos I love. But there were so many. Time to edit. I ended up with 24 framed photos. Now I was faced with how to hang so many, perfectly (well best I could) and to end up with a result that was something I could love and be proud of. And not put a million holes in the walls.

So I laid awake one night trying to come up with a painless plan. I think I did. I have tried it and it works. One of the nice outcomes is it lets you “visually see” what your gallery will look like before you put one hole in the wall. So follow along on this journey and you too can create a wall gallery showplace like a pro.

This is what you will need-

• Photos (or art)
• Frames
• Hammer
• Small nails (about 1 ½”)
• Painter’s Tape
• Acid Free Tape
• Tape Measure
• Level
• Awl
• Marker
• Scissors
• Hallmark Brand Wrapping Paper

A little note on getting started with choosing your frames. I suggest starting out simple if this is your first attempt. A good start is to work with one type of frame (same size and same color of frame) or same type of frame with several sizes of frames. Perhaps using either all color prints or all black and white prints. This will result with a pleasing cohesive overall look. However you can use this method with multiple styles, shapes, sizes of frames and photos too. The beauty is you get to “see” what your wall gallery will look like before you get the frames up. It is all about being happy with the look. And you want to love it.

You can start with either gathering your frames or gathering you photos. I like to start with the photos or art I like to display.

I changed my photos from color to black and white prints.

To determine how much of an area to use, look at the wall and mark off with painter’s tape the area that you think you want your frames to fill. Place a small strip of the Painter’s Tape top, bottom and left and right. Stand back and look. It doesn’t have to be exact, just enough to give you a feel where the frames will go.

Next, roughly measure the length and width. This area is about 60” in length by 40” in depth.

Key element, Hallmark wrapping Paper. It doesn’t have to be beautiful. We will be using the backside of the paper. Check to make sure you have a one inch square grid on the entire back of the paper. This will save you all kinds of time and frustration. What a nice little perk, thank you Hallmark.

Cut the paper the length you need for the wall.

This roll of paper was not deep enough to cover so I had to cut a second length to join together. I needed to add about 10” to the depth of the paper so I cut it about 14”, so there could be a little overlap when I attach it to the first cut length.

Lining up the two cut lengths so that the grid lines meet both vertically and horizontally. Take care with this step. The grids need to be as perfect as possible where you attached the second cut piece. Lucky you if your future wall gallery area is less than 30” deep so you need only one sheet.

Tape the two sheets together the entire length. The tape is hard to see in the photo so I scribbled on it to make it visible.

Stretching out on the newly created grid, place your photos, art on the paper. You can scramble them around over and over, until you like the arrangement.

I laid the frames over the prints and then stood back. I wasn’t in love with the look. Edit. So I purchased additional frames in several sizes. Then I placed them on the paper. I scrambled them around until I was happy with the look. I had to print out a few of the photos in a larger size to fit the new frames.

Carefully line the frames up on the grid.

 Aim to have the upper left and upper right corner on the top of the grid with the corners at the grid intersections. This will keep your frames level. It also helps to keep an eye on the space between the frames to ensure even spacing.

Once the frames were where I wanted them, I placed little dots on each of the corners of all the frames.

Then I removed the frames, and connected the dots with a line to form an outline of each frame.

Tape your newly created frame outline sheet to the wall where you plan to hang the frames with Painter’s Tape.

Stand back and look at the sheet. You can move it up, down, left, right until you are happy with the placement. This will give you an idea what your gallery will look like. You can make changes if you like.

Once you are happy with the placement, check to see if it is level. Important step. Run the level all across the top of the sheet.

 The “bubble” should look like this.

Time to clean the frames and glass. The type of frame I chose has no matt. The photo “floats” between two layers of glass. The wall color will show through. It is a nice look.

Once clean, I took an inch or so of acid free tape and made a loop.

Then I placed the loop on the back side of the photo.

Carefully center the photo onto the glass and press it down. Then cover it with the second layer of glass and put it in the frame, secure the back.

On the back of my frames there is a sawtooth hanger. It has a zig zag appearance. It is easy to hang frames and to keep them level. 

Now you need to measure the back of the frame to find the middle of the top, 4 ½”.

Put a dot on the top of the corresponding frame outline.

Measure down from the top of the frame to the exact spot the nail will hold the frame, ¼”.

Put a dot ¼” down from the first dot. This where the nail will go.

Repeat for all the frame outlines. Measure each frame. Just because the frames may all look the same the measurements may not be. Always double check. That old expression comes to mind, measure twice, cut once. Well, you get the point.

One last check, test to see the top line for each frame is level.

Make a small impression with the awl on the dot through the paper and into the wall where the nail will be placed.

It should look like this.

Repeat for all dots that are for the nails. Remove the grid paper.

Hammer one nail into each impression.

The head of the nail should be about ¼” away from the wall.

Hang your frames and you are done. Stand back and admire! There is no limit to what you can do now with a wall gallery. Enjoy the journey!

So simple, so perfect.

Read More